Skip to content

SARC INTERNATIONAL CONFERENCE – Proceedings

Papers

  1. Thermal Performance Analysis of Radiator using Aluminium Oxide Nanofluid

    Aye Ayemyo, Aung Ko Latt, War War Min Swe, Aung Kyaw Soe

    Paper ID SA-IMEC-BNKK-220525-200 · Pages 1

    Abstract

    Radiator is a device which is used as cooling system in combustion engine. The heat transfer processes take place from the coolant to the tubes then from the tubes to the air through the fins. The engine’s life, performance and overall safety are ensured due to the effective engine cooling. To ensure smooth running of an automotive vehicle under any variable load conditions, one of the major systems necessary is the cooling system. In this paper the nanofluid aluminium oxide with ethylene glycol is used as a coolant in automobile radiator. The nanofluid is varied with five different concentrations in the range of 0.1-0.5% have been prepared by the addition of aluminum oxide nanoparticles into ethylene glycol. The numerical analysis of radiator is done with ANSYS 17.0 software packet.The complex internal flows in the radiator are predicated through CFD-CFX. The flow characteristics are analyzed in the radiator.In this study, the outlet temperature of aluminum oxide nanofluid is compared with the ethylene glycol coolant in an automobile radiator.Outlet temperature decreased from 358.86K (0.1%) to358.32 K (0.5%) with aluminum oxide nanofluid. Keywords - ANSYS, CFD-CFX, Aluminium oxide, Ethylene glycol, Radiator,

    Download PDF
  2. Structural Analysis of Main Shaft with Three Different Materials for Corn Shelling Machine

    Pan Chu Chu, Htay Htay Win, War War Min Swe, Aung Kyaw Soe

    Paper ID SA-IMEC-BNKK-220725-201 · Pages 10–19

    Abstract

    This paper focuses on the design and structural analysis of shelling cylinder shaft for a corn shelling machine by changing three different materials (Carbon and alloy steel AISI-1137, Structural steel A-36 and Gray cast iron A-48). ). Failure of corn shelling cylinder shaft occurs due to tensile, shear, bending and torsion stress. This is the major source of the shelling cylinder shaft failure of the corn machine. Shelling cylinder length is 260mm, diameter is 107 mm and shaft length is 500mm. The diameter of the shelling cylinder shaft for the corn shelling machine was determined to be 25mm using the ASME code equation. The speed of shelling cylinder is 690 rpm at power supplied 0.75hp. In theoretical analysis, the maximum principal stress and maximum principal strain equation are used to predict von-Mises stress and effective strain.The three dimensional model of shaft is created in SolidWorkssoftware and imported into ANSYS for structural analysis. The von-Mises stress and effective strain are calculated for each material under typical operating conditions. Results show that carbon and alloy steel AISI-1137 provides an optimal balance between stress resistant, mechanical durability, making it the most suitable material for the shelling cylinder shaft in this application. Keywords - Carbon and Alloy Steel, Finite Element Analysis, Material Selection, Shaft, Structural Analysis.

    Download PDF