Skip to content

SARC INTERNATIONAL CONFERENCE – Proceedings

Papers

  1. PERFORMANCE ANALYSIS OF 2-BITSYNCHRONOUSUP COUNTER IN 45NM CMOS TECHNOLOGY

    HNIN NGWE YEE PWINT, TIN TIN HLA

    Paper ID SA-AEEE-BNKK-060923- 4086 · Pages 1

    Abstract

    Abstract:In this paper, a 2-bit synchronous up counter is proposed by using a D flip-flop. It is designed for low power consumption at high speeds. The flip-flops and logic gates used in the 2-bit synchronous up counter circuit are designed with NAND gates only and using Complementary Metal Oxide Semiconductor (CMOS) technology. The parametric analysis is simulated with Cadence Virtuoso software on 45nm technology. A logic diagram for a synchronous counter is presented. Synchronous counters encode the count sequence using logic between the flip-flops and a common clock. The output bits of a synchronous counter change states simultaneously. The performance analysis for a 2-bit synchronous up counter is in terms of power consumption and propagationdelay. Keywords:Synchronous counter, D flip-flop, NAND gate, CMOS technology, Power consumption, Propagation delay.

    Download PDF
  2. DESIGN AND ANALYSIS OFCMOS BASED D-TYPE FLIP FLOP BY USING 45NM TECHNOLOGY

    MAY HTET AUNG, TIN TIN HLA

    Paper ID SA-AEEE-BNKK-060923-4072 · Pages 7–13

    Abstract

    Abstract:Low-power digital systems are the key objective of the field of digital electronics. The usage of very large-scale integration(VLSI) technologies has been expanding quickly in high-performance computing, wireless communication, and consumer electronics. Growing leakage power consumption is VLSI technology's greatest challenge. The desire for high performance and low area implementation of fundamental memory elements arises from the widespread use of memory storage systems in modern electronics, and D-type flip-flop is a widely recognized state-holding element.In this paper, D-type flip-flops with Demorgan's law (DFF-DL) and D-type flip-flops with transmission gates (DFF-TG) have been designed and analyzed. Small, compact areas are the design goals of the DFF-DL and DFF-TG in order to achieve the lowest production costs and quicker processing times with a smaller transistor count. Using 45-nm CMOS (complementary metal-oxide semiconductor) technology, their schematics and corresponding layouts have been simulated.In terms of area, power consumption, and power delay, the performance of these designed circuits is analyzed using the Virtuoso tool of the Cadence simulation platform. Keywords:VLSI, D-type flip-flops with Demorgan's law (DFF-DL), D-type flip-flops with transmission gates (DFF-TG),CMOS,Virtuoso

    Download PDF
  3. ASSESSMENTS OF CURRENT PROBLEMS TO KONBAUNG WOODEN MONASTERIES: CASE STUDY OF THINGAZAR MONASTERY

    MARY OO, THET OO

    Paper ID AR-CAH-CHIA-220823-8952 · Pages 13–25

    Abstract

    Abstract - In Mandalay area, there are about 55 distinct wooden monasteries built under the dynasty of King Mindon and King Hsipaw. But that number remains only in the historical record, and it is rarely visible today. Some of these monasteries are left even concerned that natural disasters of successive generations, fire issues, animals, and the lack of maintenance by the respective people or organizations be eradicated. Therefore, these monasteries need to be maintained on time before they are badly ruined. Today, there have many academic researches about these monasteries performed by local and foreign experts but most of them are about the architecture and the artworks of woodcarving of monasteries. Therefore, it has a gap to explore the current situation of those heritage wooden monasteries and find out suitable maintenance ways for long-lasting. As regards this paper, the authors study and analyze the current situation of all the Konbaung period wooden monasteries in Mandalay at first. And then, select a monastery that needs to be maintained the most and, reveal the current condition and detailed analysis of the damage to the building with three assessments (history and previous maintenance works, physical, and architectural assessment). After making detailed assessments, the authors point out the appropriate maintenance methods and the causes of the damage to the building. And then, to reduce the causes of damage and to get healthy heritage wooden monasteries, suitable suggestions are stated. In summary and conclusion, the authors recommend and state the overall conditions of the wooden monasteries and their future plans. Keywords - Mandalay, Konbaung Wooden Monasteries, Current Condition, Damage, Assessments, Causes, Maintenance Methods

    Download PDF
  4. ENHANCING THE LIGHT-EXTRACTION EFFICIENCY IN GaInN LEDS USING GRADED-REFRACTIVE-INDEX (GRIN) PILLARS

    WAR WAR MOE, MG AYE, TIN TIN HLA

    Paper ID SA-AEEE-BNKK-060923-200 · Pages 32–63

    Abstract

    Abstract - The main goal of this research is to enhance light-extraction efficiency (LEE) in GaInN light-emitting diodes by absolutes cancellation of total internal reflection (TIR). The planar LEDs have total internal reflection that is originated by the high refractive index difference between the semiconductor of LED and surrounding medium (air). In this paper is to reduce the trap light inside the LED by controlling the refractive index with various composition of (TiO2)x(SiO2)1−x in GRIN LEDs consisting of eight dielectric layers. In addition, multilayer GRIN LEDs are simulated: the transmittance value with many layers is greater than LEDs with fewer layers. LED with high transmittance value also increases the value of LEE. The analytical simulations provided that the five-layer GRIN LED’s light-extraction efficiency remains 28.54% and 8.382 times the LEE of uncoated LEDs. The eight-layer GRIN LEE, which is 8.438 times the uncoated LED, obtains 28.73%. The LEE and emission surfaces in designs with more than five-layer do not change significantly than in five-layer design but these GRIN designs are made the remove TIR and these results are higher than the uncoated LEDs LEE. From the results, the multilayer GRIN LEDs enhanced the LEE via the transmittance and refractive index. Keywords - Dielectric layers, Refractive Index, Total internal reflection (TIR), Transmittance.

    Download PDF
  5. ANALYSIS ON OPTICAL PROPERTIES OF ALUMINUM INDIUM PHOSPHIDE LED

    HTET HTET AUNG, MAY SU HLAING, TIN TIN HLA, NYANPHYO AUNG

    Paper ID SA-AEEE-BNKK-060923-201 · Pages 38–75

    Abstract

    Abstract - A photonic device, especially an LED, can convert electrical energy into optical energy. The electronic and optical properties of Aluminum Indium Phosphide (AlInP) combination in the zinc-blende structure were investigated. The green color emission of Aluminum Indium Phosphide (AlInP) LEDs provides luminous efficiency in high-brightness LEDs. The optical properties of ternary compounds are described in terms of energy band structures, carrier distribution of electrons in the conduction band, hole distribution in the valence band, and the Fermi-Dirac distribution function. Luminous intensity versus photon energy has been attained based on the carrier concentration of electrons and holes in the conduction band and valence band. These designs are calculated using an analytical approach, and the simulation results are presented using tools for computer-based simulation Keywords - Aluminum Phosphide Indium Phosphide, Light Emitting Diodes, Light Intensity, Computer based Simulation.

    Download PDF
  6. STUDY ON THE EFFECT OF MUSHROOM (PLEUROTUSOSTREATUS) AS BIOSORBENT IN IRON REMOVAL FROM WATER

    TIN MYATMYATSOE, NYEIN MIN ZAW, NGUWAHTHINN

    Paper ID SA-CREA-BNKK-060923-4717 · Pages 42–83

    Abstract

    Abstract - The ability of Pleurotusostreatus mushroom for the biosorption of iron III from aqueous solution was investigated. Iron had been known to have negative impact on human health when accumulated in high concentration. The three parameters: initial concentration, pH and biosorbent dosage, were assessed in the experiment in terms of the effect on the biosorption. The optimum iron III biosorption was achieved 1.5 g of mushroom at pH 5, contact time 10 minutes and initial iron III concentration 100 ppm. The effect of mushroom as biosorbent in iron removal has highest magnitude in the regression analysis, but with the wider standard error margin.The coefficient of the interaction effect of pH and biosorbent concentration was observed as higher than those values of other interaction effect. The present data showed the mushroom Pleurotusostreatus might be used as an efficient biosorbent for the removal of iron. This research data could be used in further studied such as the optimization of the parameters in removing the iron concentration or mobilizing the mushroom powder for industrial use. Keywords - Mushroom, Biosorbent, FeCl3, Biosorption.

    Download PDF
  7. HAND-GUN DETECTION IN ROBBERY ACTIVITIES USING RETINA NET MODEL

    PYONE PYONE KHIN, NAY MIN HTAIK

    Paper ID SA-SEIT-BNKK-060923-4074 · Pages 46–91

    Abstract

    Abstract - Robbery with a weapon in hand is increasing day by day, and it has grown to be one of the greatest issues facing the world nowadays. There are a variety of detecting devices on the current market, but they are not designed to automatically detect robbery activities based on gun detection and alarm the owner. To address this problem, deep learning-based gun detection for determining the robbery activities in CCTV’s camera footage is used. This work presents a comparative study on gun detection algorithms in terms of backbone architecture (ResNet-50, VGG-19 and VGG-16) in RetinaNet. We have achieved an improved real-time gun detection system with the backbone of ResNet-50 that shows a higher mean average precision (mAP) score compared to the other two backbones. We create our own custom dataset for hand-gun detection. Using the RetinaNet model, the guns can be detected without the use of Sensors and Trip Wires. RetinaNet is primarily made up of the residual network (ResNet), the Feature Pyramid Network (FPN), and Fully Convolutional Networks (FCN). This system can alert the Police Station or Command Center without any human effort in real-time. The experimental results proved that our proposed model with the backbone of ResNet-50 outperforms accurately in detecting guns that achieved in a mAP of 96.52%.. Keywords - Robbery Activities, Retina Net, Res Net, FPN, FCN.

    Download PDF